This BTU calculator sizes an air conditioner or heater for a single room. Enter the room dimensions and ceiling height, then adjust for sun exposure, the number of people and whether it is a kitchen. You get the cooling capacity in BTU per hour, the nearest standard AC size, the equivalent in tons and kilowatts, and a heating estimate for your climate zone.
How to use the BTU calculator
- Enter the room length, width and ceiling height in feet or meters.
- Choose the sun exposure: rooms with large west- or south-facing windows run hotter.
- Enter how many people regularly use the room — each extra person adds body heat.
- Select kitchen if the room has a stove and oven.
- Pick your climate to estimate the heating BTU.
How the BTU calculation works
Cooling capacity starts from the ENERGY STAR room air conditioner sizing chart, then applies its standard adjustments:
Base BTU = ENERGY STAR chart value for the floor area Ceiling = Base × (Ceiling height ÷ 8 ft) when above 8 ft Sun = −10% heavily shaded, +10% very sunny Occupants = +600 BTU for each person beyond two Kitchen = +4,000 BTU Tons = BTU ÷ 12,000 kW = BTU × 0.000293 Heating BTU ≈ Floor area × 30–55 BTU/ft² (by climate)
ENERGY STAR AC sizing chart
| Area to be cooled (ft²) | Capacity needed (BTU/h) |
|---|---|
| 100 – 150 | 5,000 |
| 150 – 250 | 6,000 |
| 250 – 300 | 7,000 |
| 300 – 350 | 8,000 |
| 350 – 400 | 9,000 |
| 400 – 450 | 10,000 |
| 450 – 550 | 12,000 |
| 550 – 700 | 14,000 |
| 700 – 1,000 | 18,000 |
| 1,000 – 1,200 | 21,000 |
| 1,200 – 1,400 | 23,000 |
| 1,400 – 1,500 | 24,000 |
| 1,500 – 2,000 | 30,000 |
| 2,000 – 2,500 | 34,000 |
Example calculation
A 15 × 20 ft living room (300 ft²) with 8 ft ceilings, big sunny windows and three regular occupants:
- Chart value for 300 ft² = 7,000 BTU
- Very sunny +10% → 7,700 BTU
- One extra person +600 → 8,300 BTU/h
- Next standard window unit: 10,000 BTU (0.83 ton), about 2.4 kW of cooling
- Heating in a mixed climate: 300 × 40 = 12,000 BTU/h
Heating BTU per square foot by climate
| Climate | Typical heating load | Example for 500 ft² |
|---|---|---|
| Hot (zones 1–2) | 30 BTU/ft² | 15,000 BTU/h |
| Warm (zone 3) | 35 BTU/ft² | 17,500 BTU/h |
| Mixed (zone 4) | 40 BTU/ft² | 20,000 BTU/h |
| Cool (zone 5) | 45 BTU/ft² | 22,500 BTU/h |
| Cold (zones 6–7) | 50–60 BTU/ft² | 25,000–30,000 BTU/h |
Well-insulated new homes need less; drafty older homes need more. For whole-house HVAC sizing, contractors use a Manual J load calculation, which this quick estimate does not replace.
Tips for choosing the right size
- Don’t oversize. An AC that is too big cools the room quickly but shuts off before removing humidity, leaving it cold and clammy.
- Don’t undersize either — a small unit runs constantly on hot days and never reaches the set temperature.
- Open floor plans: include connected areas without doors in the square footage.
- Check the circuit: units above about 12,000 BTU often need a dedicated 20 A or 230 V circuit. Estimate running costs with the electricity cost calculator.
- Efficiency: compare CEER (window units) or SEER2 (central and mini-split) ratings — higher numbers mean lower bills for the same BTU.
Related calculators
- Square Footage Calculator
- Electricity Cost Calculator
- kW to HP Converter
- Insulation Calculator
- Celsius to Fahrenheit Converter
Frequently Asked Questions
How many BTUs do I need per square foot?
For cooling, plan on roughly 20 BTU per square foot for typical rooms with 8 foot ceilings, following the ENERGY STAR chart. A 300 square foot room needs about 7,000 BTU before adjustments for sun, people and kitchens.
What size air conditioner do I need for a 12×12 room?
A 12 × 12 foot room is 144 square feet, which needs about 5,000 BTU of cooling. Choose a 6,000 BTU unit if the room is very sunny or used by more than two people.
How many BTUs is a ton of air conditioning?
One ton of cooling equals 12,000 BTU per hour. A 2-ton system provides 24,000 BTU/h and a 3-ton system 36,000 BTU/h.
How many BTUs do I need to heat a room?
Multiply the floor area by 30 to 60 BTU per square foot depending on climate and insulation. A 500 square foot room in a mixed climate needs about 20,000 BTU/h.
How do I convert BTU to watts?
Multiply BTU per hour by 0.293 to get watts. A 10,000 BTU air conditioner provides about 2,930 W (2.9 kW) of cooling; its electrical draw is much lower, typically 800 to 1,000 W.